28" ✕ 20" Tracked Dual Jaw Crusher/Screener
Key Specs
See all specsOperating Weight
Up to 45,000 lb
Size Out
1.50"- 5"
Ton per hour
30 - 150 tph
Why buy from Machinery Partner?
Overview
The Barford 750J RS is a mobile tracked jaw crusher that features a 7' X 3' three-way screen attached to the main output conveyor. It is perfect for all kinds of materials and applications including crushing and screening concrete, rock, brick, pavers, asphalt and more. The dual-power diesel electric Cat engine optimizes fuel efficiency and ensures compliance with stringent environmental regulations on job sites. It is also made for working in built-up and residential sites and it can even be plugged into mains electricity for use in noise-restricted areas. The tracked design makes moving the crusher from job site to job site easy. With the onboard screener, you can make on-spec material with one machine instead of two! Want to detach the screener? No problem, in just a few minutes the screener can be removed from the conveyor and the crusher can be used as a stand-alone unit.
Additional Information
Example stockpile rate for each conveyor at different output settings
Below is the estimated output of the Barford 750J RS when using a 1.5-inch top screen and a ¾-inch bottom screen while crushing granite. To make sure the jaw isn't overloaded, please only load material that is less than 80% of the jaw inlet.
CSS [Closed Side Setting] | 5ˮ Wide open | 2.5ˮ Half closed | 1.5ˮ Fully closed |
|---|---|---|---|
Oversize 1.5ˮ to 5ˮ] | Remove screen box | 41 tph 59% | 25 tph 55% |
Midsize ¾ˮ to 1.5ˮ] | Remove screen box | 19 tph 27% | 8 tph 18% |
Fines ¾ˮ minus] | Remove screen box | 10 tph 14% | 12 tph 27% |
Get a loan
Features
Included 3 product screen with mesh size from 3/4" to 1.6"
Tracked mobility
Electric drive conveyors
Hydraulic wedge jaw adjustment
Eaton hydraulics
Diesel/electric hybrid power
Vibrating hopper feeder with feed sensor
Reversible jaw plates
Specs
Processed materials
Asphalt, Basalt, Brick, Concrete, Demolition Waste, Gravel, Rock
Warranty
12 months / 2000 hours warranty
Ton per hour
30 - 150 tph
Operating Weight
Up to 45,000 lb
Size Out
1.50"- 5"
Engine Power
130 hp
Engine Type
CAT 3.6 Tier 4 Stage 5
Feed Height
9'8"
Size In
16"
Fuel Consumption
3 gal/h
Jaw Size
28" X 20"
Mobility
Mobile
Max Rock Size In
16"
Power Source
Diesel / Electric
Stockpile Height
8'1"
Throw
0.88"
Transport Size (L x W x H)
39' X 7'10" X 10'2"
Working Size (L x W x H)
39' X 16'2" X 9'5"
Optional add-ons
Videos
Frequently Asked Questions
Downloads
750J RS - Brochure.pdf
Download
What customers say about us
Espinoza Trucking LLC
"Yeah I'd definitely recommend Machinery Partner to someone looking to purchase a crusher. The 2716 for me is perfect for what I'm using it for, but it really depends on what you're trying to do. I'm planning on upgrading with Machinery Partner in the next year or two."
A C Smith and Son Construction
"We like our machine and have been using it. We have put a couple hundred hours on it and it is running fine! We have had no problems at all. The machine is nice and compact and does what it should. We crush concrete and rock."
CFB Outdoors, Inc.
"Machinery Partner has been great to work with. They get me answers as soon as I ask. I have had an excellent experience with Barford. All of the machine information provided was accurate."
Clean Green Tree Service
"Working with MP has been a good experience, I would work with MP again for a future purchases. Very reliable machine, it does everything i need it to do and more. It gives me a lot of extra business. The machines functionality is flawless."
Royal Pavers LLC
"Machinery Partner is a great company. I haven't had to do much service to my machine yet. The J-1910 is a good small machine for a starter set up. For the next 2 or 3 years, this ARK machine is perfect for my operation."
MG Construction
"We have had a good experience with our crusher. I crush granite, stone, concrete, brick. It crushes pretty fast and the machine is still working pretty good. I recommend Machinery Partner."
WM Landfill
"Pretty satisfied with the brand, we use our machine to move clay. If we were to source a new conveyor I would source through MP again. MP support has not been needed because the delivery and everything went as planned."
Appalachian Wash Stone and Gravel
“I couldn't be happier, that is exactly what I pictured in my head”
About the manufacturer
Barford equipment is manufactured among the world's top crushing, screening, and material handling brands in Ireland. It has an outstanding reputation for quality and reliability and with over 150 years in manufacturing. Barford's focus is reliability, simplicity, and functionality to get the job done. It's mission is to use its experience supply customers with equipment that add value to their business.
Learn More
